TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector

Pad dimensions: 72mm diameter 33mm height, Slot Dimensions: 10mm Wide 13mm deep, does not fit Trolley Jacks. Without proper support the thin rails bend and cause future use of them to be problematic, and even unsafe if the jack cannot secure to the jack point. Protect your frame rails when jacking up your car with these jack pads.

Prevent your oe jack point pinch welds from bending when using a Jack to lift your car. Designed to be sturdy enough to support your lift point while soft enough to preventing crushing the contact area. Durable polyurethane construction, medium size for added cushion and cross hatched pattern for added grip.

Fits most jacks and vehicles, please verify dimensions below to ensure fitment. Often times for vehicles too low or in an emergency situation the factory side jack points need to be utilized.

ERIC EK-50 Compatible Models Torin Big red T43002 Jack Pad Adapter Rubber Pads Slotted Frame For Jack stand 2pieces general-purpose rubber.

Dimensions are also shown in images Other If you have a jack stand of the same shape, you can use it as a general purpose item. Quantity: 2 pieces length:63mm hight:50mm width:44mm Groove depth:17mmIt can be confirmed from the photograph. It is used to avoid scratching the car body when jacking up the vehicle.

This item will not damage the jack point. When jacking up, this item protects the interference part of the lower part of the car body. When jacking up, this item prevents damage to the bottom of the car body. Please check the usage in the image. As the material of this product is rubber, please refrain from using for long time.

It is used to avoid scratching the car body when jacking up the vehicle. Length: 63 mm height: 50 mm Width: 44 mm Groove depth: 17 mm. Quantity: 2 pieces torin big red Can be used for T43002 or A. As the material of this product is rubber, please refrain from using for long time.


Similar products

DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
2-Pack of Rubber Jack Pads (Slotted) - Universal, Standard-Size - Frame Rail Protector
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size 2 Pack
TMB Motorsports TMB 2 Pack Universal Medium Size Slotted Rubber Jack Pad Frame Rail Protector
Byenins Large Slotted Universal Magnetic Jack Pad Weld Frame Rail Adapter(Blue) for All Model Cars
TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
DEDC Advanced Grooved Universal Magnetic Jack Pad Pinch Weld Frame Rail Adapter (Orange)
TMB Motorsports 2 Pack Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
Single Extra Large Universal Polyurethane Floor Jack Pad Adapter
YM W4194 Solid Rubber Wheel Chock with Handle, 8-3/4" Length, 4" Width, 6" Height - Pack of 2


DEDC 2 Pack Jack Pad Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector

Warranty: we provide every customer with satisfaction warranty, for any issues about our products, we could offer free replacement or full refund, please just contact us. X1f697; 【avoid scratching】protect the car body when jacking up the vehicle. Jack support cushioning pressure pad, can cope with extreme environments, can effectively resist pressure, give travel more protection.

Package includes: 2 x jack pads quantity: 2 pieces length:63mm hight:50mm width:44mm Groove depth:17mmIt can be confirmed from the photograph. It is used to avoid scratching the car body when jacking up the vehicle. This item will not damage the jack point. When jacking up, this item protects the interference part of the lower part of the car body.

When jacking up, this item prevents damage to the bottom of the car body. Durable rubber const. X1f697; 【jack support cushioning Pressure Pad】Could effectively resist pressure, can cope with extreme en. X1f697; 【fits most jacks & vehicles】Please check its dimension before your purchase. X1f697; 【package includes】2 x jack Pad Universal Slotted Frame Rubber; Satisfaction Warranty: any dissati.

Features: it is used to avoid scratching the car body when jacking up the vehicle. Length: 63 mm height: 50 mm Width: 44 mm Groove depth: 17 mm.


Similar products

DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
2-Pack of Rubber Jack Pads (Slotted) - Universal, Standard-Size - Frame Rail Protector
Byenins Large Slotted Universal Magnetic Jack Pad Weld Frame Rail Adapter(Blue) for All Model Cars
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size 2 Pack
TMB Motorsports TMB 2 Pack Universal Medium Size Slotted Rubber Jack Pad Frame Rail Protector
Haissen Jack Pad Adapter Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector Black 2 Pack
DEDC Advanced Grooved Universal Magnetic Jack Pad Pinch Weld Frame Rail Adapter (Orange)
TMB Motorsports 2 Pack Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
ERIC EK-50 Compatible Models Torin Big red T43002 Jack Pad Adapter Rubber Pads Slotted Frame For Jack stand (2pieces ) general-purpose rubber.


Haissen Jack Pad Adapter Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector Black 2 Pack

2. Often times for vehicles too low or in an emergency situation the factory side jack points need to be utilized. Tips to remove the odour if you care much: immerse jack pad inside mixture of water and Hydrogen Peroxide buy from pharmacy and shops for some time and then take it outside and dry in the air, ordor will disappear.

Durable rubber construction, could be used for a long time;. Durable material】made of very sturdy rubber. It will prevent your frame rails and pinch welds from bending when using a Jack to lift your car, can also protect painted or coated suspensions components. Perfect design】the rubber pad adds extra grip when raising the car and reduce slipping, Michelin etc.

Maximum load & size】: this upgraded version jack pad can load 3 TON; Size: Length 63mm; Hight 50mm; Width 44mm; Groove depth 17mm. Also keeps the chassis rails from getting bruised, it is stable and suitable for any type of body and Jack like Unitec, bent or broken. Universal】: fits most jacks and vehicles, please check its dimension before your purchase.

Durable rubber const. Friendly note: Please verify dimensions and ensure fitment to your vehicle. As the material of this product is rubber, please refrain from using for long time.


Similar products

2-Pack of Rubber Jack Pads (Slotted) - Universal, Standard-Size - Frame Rail Protector
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
DEDC 2 Pack Jack Pad Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector
TMB Motorsports TMB 2 Pack Universal Medium Size Slotted Rubber Jack Pad Frame Rail Protector
TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
MUTOCAR Jack Pad Universal Slotted Frame Rubber Jack Pad 6.5cm/2.56inch Frame Rail Protector,2Pack
DEDC Advanced Grooved Universal Magnetic Jack Pad Pinch Weld Frame Rail Adapter (Orange)
DEDC 2 Packs Universal Slotted Rubber Jack Pad Frame Rail Protector Pinch Weld Protector
Byenins Large Slotted Universal Magnetic Jack Pad Weld Frame Rail Adapter(Blue) for All Model Cars
Torin Big Red Aluminum Jack Stands: 3 Ton Capacity, 1 Pair,T43004


DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector

As the material of this product is rubber, please refrain from using for long time. X1f697; 【material & size】heavy duty construction rubber material, Maximum Load Bearing 2 Ton; Size: Lengt. Maximum load & size】: this upgraded version jack pad can load 3 TON; Size: Length 63mm; Hight 50mm; Width 44mm; Groove depth 17mm.

X1f697; 【fits most jacks & vehicles】Please check its dimension before your purchase. Durable rubber const. Protect your frame rails when jacking up your car with these jack pads. Many car and truck repair manuals will tell you to jack up your vehicle by the standard jack points which can be on the pinch seam weld or the frame rail Often times for vehicles too low or in an emergency situation the factory side jack points need to be utilized.

. Maximum load bearing: 2 tondedc Jack Pad This is a must have product for any professional or home mechanic. Durable material】made of very sturdy rubber. X1f697; 【avoid scratching】protect the car body when jacking up the vehicle. X1f697; 【jack support cushioning Pressure Pad】Could effectively resist pressure, can cope with extreme en.

It will prevent your frame rails and pinch welds from bending when using a Jack to lift your car, can also protect painted or coated suspensions components. Perfect design】the rubber pad adds extra grip when raising the car and reduce slipping, Michelin etc.


Similar products

ERIC EK-50 Compatible Models Torin Big red T43002 Jack Pad Adapter Rubber Pads Slotted Frame For Jack stand (2pieces ) general-purpose rubber.
DEDC 2 Pack Jack Pad Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector
LiftMaster 2.5 Ton Low Profile Floor Jack
Hopkins 11930MI FloTool Heavy Duty Wheel Chocks, Set of 2
Haissen Jack Pad Adapter Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector Black 2 Pack
DEDC Advanced Grooved Universal Magnetic Jack Pad Pinch Weld Frame Rail Adapter (Orange)
Byenins Large Slotted Universal Magnetic Jack Pad Weld Frame Rail Adapter(Blue) for All Model Cars
ABN 2 Piece Wheel Hanger Set M14 x P1.5 Automotive Mechanic Tool
TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
BLOXSPORT M14x1.5 1 piece Wheel Hanger Wheel Lug Bolt Guide Automotive Mechanic Tool for Audi VW Porschse Mercedes Maserati


Byenins Large Slotted Universal Magnetic Jack Pad Weld Frame Rail AdapterBlue for All Model Cars

Base diameter is 3". Durable rubber const. X1f697; 【package includes】2 x jack Pad Universal Slotted Frame Rubber; Satisfaction Warranty: any dissati. X1f697; 【fits most jacks & vehicles】Please check its dimension before your purchase. As the material of this product is rubber, please refrain from using for long time.

X1f697; 【material & size】heavy duty construction rubber material, Maximum Load Bearing 2 Ton; Size: Lengt. Small tips: because it is new. X1f697; 【avoid scratching】protect the car body when jacking up the vehicle. Slot depth is 063". Maximum load & size】: this upgraded version jack pad can load 3 TON; Size: Length 63mm; Hight 50mm; Width 44mm; Groove depth 17mm.

It will prevent your frame rails and pinch welds from bending when using a Jack to lift your car, can also protect painted or coated suspensions components. Perfect design】the rubber pad adds extra grip when raising the car and reduce slipping, Michelin etc. Confirmation before order will be really preciated quantity: 2 pieces length:63mm hight:50mm width:44mm Groove depth:17mmIt can be confirmed from the photograph.

It is used to avoid scratching the car body when jacking up the vehicle. This item will not damage the jack point. When jacking up, this item protects the interference part of the lower part of the car body.


Similar products

ERIC EK-50 Compatible Models Torin Big red T43002 Jack Pad Adapter Rubber Pads Slotted Frame For Jack stand (2pieces ) general-purpose rubber.
DEDC 2 Pack Jack Pad Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
2-Pack of Rubber Jack Pads (Slotted) - Universal, Standard-Size - Frame Rail Protector
TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
Haissen Jack Pad Adapter Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector Black 2 Pack
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size 2 Pack
2 Pack Jack Pad Adapter Rubber Jack Pads Slotted Frame for Jack Stand General-Purpose Rubber
DEDC Advanced Grooved Universal Magnetic Jack Pad Pinch Weld Frame Rail Adapter (Orange)
ACDelco 10-4034 Dexron LS 75W-90 Gear Oil - 32 oz


Universal for BMW and Mini Adaptor Slotted Polyurethane Jack Pad Frame Rail Protector

This jack pad is to fit the weld on most uni-body vehicles so that the vehicle can be jacked up safely without damage to the weld or Rocker Panel. There are 2 neodymium rare earth magnets so that the supreme holding strength while placing jack and lifting vehicle. Fits most pinch weld that is at least 3 inches.

X1f697; 【jack support cushioning Pressure Pad】Could effectively resist pressure, can cope with extreme en. Maximum load bearing: 2 ton; universal:Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle. Durable: durable rubber construction, medium size provides more cushion and crush resistance.

Useable: protects pinch weld Seams and Frame Rails from bending or breaking when jacking up your car with these jack pads. Helpful: prevent your frame rails from bending when using a Jack to lift your car. Durable rubber construction, could be used for a long time;. Small tips: because it is new. Durable rubber const.

. Also keeps the chassis rails from getting bruised, it is stable and suitable for any type of body and Jack like Unitec, bent or broken. Universal】: fits most jacks and vehicles, please check its dimension before your purchase.


Similar products

Titan Tools 21091 17mm 1/2" Drive Non-Marring Deep Lug Nut Socket
Motivx Tools BMW Oil Filter Wrench for 86mm Cartridge Style Oil Filter Housing Caps
URO Parts 51 71 8 268 885 Jack Pad
Mann-Filter HU 816 X Metal-Free Oil Filter
TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
Castrol 03101 EDGE 0W-40 A3/B4 Advanced Full Synthetic Motor Oil, 5 quart, 1 pack
TEKTON 1/2" Drive Click Torque Wrench (10-150'.-Lb./13.6-203.5 Nm) | 24335
Steelman 06137 Oil Filter Cap Wrench 86mm x 16 Flute
DEDC 2 Pack Jack Pad Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector


Auto Accessories Dealer Single Universal Small Slotted Polyurethane Jack Pad Frame Rail Protector

Base diameter: 2. 8 inches square Dimensions: 2. 2 inches, does not fit Trolley Jacks. Maximum load & size】: this upgraded version jack pad can load 3 TON; Size: Length 63mm; Hight 50mm; Width 44mm; Groove depth 17mm. Also keeps the chassis rails from getting bruised, it is stable and suitable for any type of body and Jack like Unitec, bent or broken.

Universal】: fits most jacks and vehicles, please check its dimension before your purchase. The opening of each slotted jack pad is 0385" wide by 3" in length. Durable rubber const. Small tips: because it is new. Maximum load bearing: 2 ton; universal:Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle.

Durable: durable rubber construction, medium size provides more cushion and crush resistance. Useable: protects pinch weld Seams and Frame Rails from bending or breaking when jacking up your car with these jack pads. Helpful: prevent your frame rails from bending when using a Jack to lift your car. Soft rubber surface, do not scratch painted or coated chassis parts.

Dimensions: 75mm diameter 35mm height, this rubber jack pad smells like rubber is supposed to smell, Slot Dimensions: 10mm Wide 15mm deep. By the way, a little bit stinks when new.


Similar products

TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
DEDC 2 Pack Jack Pad Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector
Single Extra Large Universal Polyurethane Floor Jack Pad Adapter
ERIC EK-50 Compatible Models Torin Big red T43002 Jack Pad Adapter Rubber Pads Slotted Frame For Jack stand (2pieces ) general-purpose rubber.
Ernst Manufacturing Jack Stand Covers, Set of 4, Yellow
TMB Motorsports Single Full Size Large Universal Slotted Polyurethane Jack Pad
YM W4194 Solid Rubber Wheel Chock with Handle, 8-3/4" Length, 4" Width, 6" Height - Pack of 2
Prothane 191412 Red Jack Stand Pads fits up to 1.5 X 4.5 Inch Heads
Genuine Subaru SOA868V9270 Super Coolant


TMB Motorsports Single Full Size Large Universal Slotted Polyurethane Jack Pad

X1f697; 【package includes】2 x jack Pad Universal Slotted Frame Rubber; Satisfaction Warranty: any dissati. Can also protect painted or coated suspensions components, cross hatch pattern to provide extra grip. Fits most jacks and vehicles, compare dimensions and ensure fitment to your vehicle. What you get】 : 2 x jack pad universal slotted frame rubber.

Our worry-free 18-month warranty and friendly customer service. Fits most jacks and most late model BMW or Mini vehicles. Soft rubber surface, do not scratch painted or coated chassis parts. Dimensions: 75mm diameter 35mm height, this rubber jack pad smells like rubber is supposed to smell, Slot Dimensions: 10mm Wide 15mm deep.

By the way, a little bit stinks when new. Fitment : All model cars. Maximum load bearing: 2 ton; universal:Fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle. Durable: durable rubber construction, medium size provides more cushion and crush resistance. Useable: protects pinch weld Seams and Frame Rails from bending or breaking when jacking up your car with these jack pads.

Helpful: prevent your frame rails from bending when using a Jack to lift your car. Adds extra grip when raising the car and reduce slipping.


Similar products

ERIC EK-50 Compatible Models Torin Big red T43002 Jack Pad Adapter Rubber Pads Slotted Frame For Jack stand (2pieces ) general-purpose rubber.
TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
DEDC Advanced Grooved Universal Magnetic Jack Pad Pinch Weld Frame Rail Adapter (Orange)
2-Pack of Rubber Jack Pads (Slotted) - Universal, Standard-Size - Frame Rail Protector
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
Single Extra Large Universal Polyurethane Floor Jack Pad Adapter
Ernst Manufacturing Jack Stand Covers, Set of 4, Yellow
YM W4194 Solid Rubber Wheel Chock with Handle, 8-3/4" Length, 4" Width, 6" Height - Pack of 2
Auto Accessories Dealer Single Universal Small Slotted Polyurethane Jack Pad Frame Rail Protector
Prothane 19-1405 Red 5" Jack Pad


Single Extra Large Universal Polyurethane Floor Jack Pad Adapter

Adds extra grip when raising the car and reduce slipping. X1f697; 【jack support cushioning Pressure Pad】Could effectively resist pressure, can cope with extreme en. X1f697; 【fits most jacks & vehicles】Please check its dimension before your purchase. What you get】 : 2 x jack pad universal slotted frame rubber.

Our worry-free 18-month warranty and friendly customer service. Fits most jacks and vehicles, compare dimensions and ensure fitment to your vehicle. Fits most jacks and most late model BMW or Mini vehicles. Fits most vehicles and floor jacks, please ensure fitment by checking listed dimensions. Polyurethane construction, soft enough to absorb hard edges while supporting the vehicle without deforming.

Prevent your frame rails from bending when using a jack to lift your car and avoid scratching coated surfaces. Protect your frame rails when jacking up your car with these jack pads. Soft rubber surface, do not scratch painted or coated chassis parts. Dimensions: 75mm diameter 35mm height, this rubber jack pad smells like rubber is supposed to smell, Slot Dimensions: 10mm Wide 15mm deep.

By the way, a little bit stinks when new. Fitment : All model cars.


Similar products

DEDC 2 Pack Jack Pad Universal Slotted Frame Rubber Frame Rail Protector Pinch Weld Protector
ERIC EK-50 Compatible Models Torin Big red T43002 Jack Pad Adapter Rubber Pads Slotted Frame For Jack stand (2pieces ) general-purpose rubber.
TMB Motorsports 2 Pack Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
Auto Accessories Dealer Small Universal Slotted Polyurethane Jack Pad Frame Protector by TMB
2 Pack Jack Pad Adapter Rubber Jack Pads Slotted Frame for Jack Stand General-Purpose Rubber
Prothane 191412 Red Jack Stand Pads fits up to 1.5 X 4.5 Inch Heads
DEDC Advanced Grooved Universal Magnetic Jack Pad Pinch Weld Frame Rail Adapter (Orange)
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
TMB Motorsports Single Polyurethane Universal Medium Size Slotted Jack Pad Frame Rail Protector
Ernst Manufacturing Jack Stand Covers, Set of 4, Yellow


Ernst Manufacturing Jack Stand Covers, Set of 4, Yellow

Also keeps the chassis rails from getting bruised, it is stable and suitable for any type of body and Jack like Unitec, bent or broken. Universal】: fits most jacks and vehicles, please check its dimension before your purchase. Slot depth is 063". Prevent your frame rails and pinch welds from bending when using a Jack to lift your car.

Fits most jacks and most late model BMW or Mini vehicles. Polyurethane construction, soft enough to absorb hard edges while supporting the vehicle without deforming. Set of 4. What you get】 : 2 x jack pad universal slotted frame rubber. Our worry-free 18-month warranty and friendly customer service. Soft rubber surface, do not scratch painted or coated chassis parts.

Dimensions: 75mm diameter 35mm height, this rubber jack pad smells like rubber is supposed to smell, Slot Dimensions: 10mm Wide 15mm deep. By the way, a little bit stinks when new. Fitment : All model cars. X1f697; 【jack support cushioning Pressure Pad】Could effectively resist pressure, can cope with extreme en.

Maximum load & size】: this upgraded version jack pad can load 3 TON; Size: Length 63mm; Hight 50mm; Width 44mm; Groove depth 17mm. Dimensions: length 5 1/2" height 1 3/4" sloth Width 3/8" Slot Depth 3/4", does not fit Trolley Jacks.


Similar products

DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size, Frame Rail Protector
Hein-Werner HW93503 Blue/Yellow Jack Stand - 3 Ton Capacity
DEDC Jack Pad Universal Slotted Frame Rubber Jack Pad Medium Size 2 Pack
Hein-Werner HW93506 Blue/Yellow Jack Stands, 6 Ton Capacity (Set of 2)
2-Pack of Rubber Jack Pads (Slotted) - Universal, Standard-Size - Frame Rail Protector
Prothane 19-1405 Red 5" Jack Pad
DEDC 2 Packs Universal Slotted Rubber Jack Pad Frame Rail Protector Pinch Weld Protector
ERIC EK-50 Compatible Models Torin Big red T43002 Jack Pad Adapter Rubber Pads Slotted Frame For Jack stand (2pieces ) general-purpose rubber.
Prothane 191412 Red Jack Stand Pads fits up to 1.5 X 4.5 Inch Heads
Auto Accessories Dealer Small Universal Slotted Polyurethane Jack Pad Frame Protector by TMB