Top 10 1S HV Lipo Charger – RC Battery Chargers

As an Amazon Associate I earn from qualifying purchases.

1. Crazepony

#ad

Upgrade 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

#ad
Crazepony #ad - Only support lihv 3. 8v/4. 35v 1s battery, not for 3. 7v/4. 20v 1s lipo battery. Need to consider width of battery. Charger plug: micro 1. 25 and jst-ph 2. 0, aka mcx and mcpX, Charging max 6 batteries at the same time. Usb interface input suggested range: 5V±5% on 05-2. 4a, suggested 2. 4a or above. The 6 led lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged. Support 02a/06a charge current by switch button ( Suggest using 02a if you charge six at the same time and 06a if you only do 2).
BrandCrazepony #ad
ManufacturerCrazepony #ad
Height0.39 Inches
Length2.87 Inches
Weight0.03 Pounds
Width3.94 Inches
Part NumberW155801AMBSK281

2. Crazepony

#ad

UP-S6 1S LiPo Battery Charger LiPo/LiHV Charger for Blade Inductrix Tiny Whoop mCX mCPX Micro Losi Connector

#ad
Crazepony #ad - Battery over voltage protection and DC input voltage protection. Usb port 5v/2. 1 a for charging iPad, digital cameras, mobile phones, etc. Six independent ports can be used at the same time. Three different kinds of battery connectors in each port:Micro. Adjustable charging current from 01-1. 0a, support battery type:LiPo/LiHV. Maximum protection: battery reverse polarity protection. Mx, mcpX. Note: power adapter sold separately! .
BrandCrazepony #ad
ManufacturerCrazepony #ad
Height0.87 Inches
Length3.94 Inches
Weight0.15 Pounds
Width1.97 Inches
Part NumberR170000XFK1020303
ModelR170000XFK1020303

3. AKK

#ad

AKK 1S LiPo LiHV Battery Charge Board Micro JST 1.25 and JST-PH 2.0 2-6S Input LiPo Battery Drone Charger for Blade Inductrix Tiny Whoop

#ad
AKK #ad - 6 independent charging ports: 02/06a & 4. 2/4. 35v swichable for each set of port. Xt60 2s-6s lipo or dc 12v/3A adapter. Led indicator clearly shows your batteries charging status. Support lipo and lihv batteries by a voltage switch: 4. 2v for liPo, 4. 35v for LiHV. Output connectors: micro jst 1. 25, jst-ph 2. 0 and micro losi and JST by the cables, compatible with most batteries.
BrandAKK #ad
ManufacturerAKK #ad
Weight0.08 Pounds
Part NumberK-1213

4. Crazepony

#ad

1S LiPo Battery USB Charger 3.7V/4.20V 6 Channel 1S LiPo Charger Tiny Whoop Blade Inductrix Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

#ad
Crazepony #ad - Need to consider width of battery. Support 02a/06a charge current by switch button ( Suggest using 02a if you charge six at the same time and 06a if you only do 2). Usb interface input suggested range: 5V±5% on 05-2. 4a, suggested 2. 4a or above. Only support lipo 3. 7v/4. 20v 1s battery. Charger plug: micro 1. 25 and jst-ph 2. 0, aka mcx and mcpX, Charging max 6 batteries at the same time. The 6 led lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.
BrandCrazepony #ad
ManufacturerCrazepony #ad
Height0.39 Inches
Length2.87 Inches
Weight0.03 Pounds
Width3.94 Inches
Part NumberV1601575T270281

5. Keenstone

#ad

Keenstone Lipo Battery Charger/Discharger with Low Voltage Checker, 10A 100W AC/DC 1S-6S Digital Battery Balance Charger for Li-Po Li-Hv Li-Ion Li-Fe NiMH Ni-Cd Pb

#ad
Keenstone #ad - Smart chargerkeenstone smart charger allows you to memorize up to 10 data of yours battery and you can not set the proper value of your battery while charging and discharging; set the charge or discharge time; set the value of the automatic stop voltage etc.

Support connector types equipped with mini tamiya connector, XT60 and exposed wire to your choice, standard Tamiya, Alligator clips, Deans, which gives you a lot of ease of charging or discharging your battery with suitable connector. Package content 1 * keenstone 100w balance charger; 1 * balance socket; 1 * lipo voltage checker; 1 * mini tamiya Connector; 1 * Standard Tamiya Connector; 1 * XT60 Connector; 1 * Deans Connector; 1 * Alligator Clips; 1 * Bare Connector; 1 * User Manual.

Charge & discharge keenstone lipo balance charger & discharger allows you to charge your battery to the limit of 01-10a; unload your battery at the limit of 01-5a at your request. Support battery type keenstone balance charger supports 7 types of batteries: lipo: 1-6 cell, Li-ion: 1-6 cell, PB: 2-24V, NiCd: 1-15 cell, NiMH: 1-15cell, LiFe: 1-6 cell, liHv: 1-6 cell, which satisfies your need of choice.
BrandKeenstone #ad
ManufacturerKeenstone #ad
Height4.53 Inches
Length5.12 Inches
Weight1.75 Pounds
Width2.4 Inches
Part NumberC1-XR

6. Crazepony

#ad

4pcs 650mAh 1S Battery 3.8V HV LiPo Battery 60C with JST-PH 2.0 PowerWhoop mCPX Connector for Inductrix FPV Plus 75mm Frame Kit Micro FPV Drone

#ad
Crazepony #ad - This 650mah 1s lipo fits well into many fpv racing drones, including but not limited to the Inductrix FPV Plus Mobula 7 Eachine M80 Beta75Pro Mobula 7 HD.

Please contact us in time when you receive the batteries that got puffed, we will take all responsibility for your satisfaction. This fpv 1s battery is with the larger capacity of 650mAh, Small size of 59 * 16 * 7. 5 mm, light weight of 14. 58g/pcs. Gn3 650mah 1s battery has a ph2. 0 connection like most all Whoop sized batteries, so it should connect to most all Micro FPV Drone. Don't throw it into fire. Note: as a fpv battery, don't over-charge, or over-discharge batteries. Don't throw it into water. Don't put it beside the high temperature condition.
BrandCrazepony #ad
ManufacturerCrazepony #ad
Height0.29 Inches
Length2.32 Inches
Width0.62 Inches
Part NumberWG05Y1GB7EQ1265I4LHML

7. HobbyFly

#ad

HobbyFly 1S LiPo Battery USB 3.8V/4.35V Charger 6 Channel 1S LiHV Charger for EMAX Tinyhawk Blade Inductrix Tiny Whoop Inductrix FPV Plus Battery Micro JST 1.25 JST-PH 2.0 mCX mCPX Connectors

#ad
HobbyFly #ad - Need to consider width of battery. Support 02a/06a charge current by switch button ( Suggest using 02a if you charge six at the same time and 06a if you only do 2). Charger plug: micro 1. 25 and jst-ph 2. 0, aka mcx and mcpX, Charging max 6 batteries at the same time. Only support lihv 3. 8v/4. 35v 1s battery, not for 3. 7v/4. 20v 1s lipo battery. Usb interface input suggested range: 5V±5% on 05-2. 4a, suggested 2. 4a or above. The 6 led lights indicate the charging state of the six channels independently, LED solid indicates charging, LED off indicates full charged.
BrandHobbyFly #ad
ManufacturerHobbyFly #ad
Height0.39 Inches
Length2.87 Inches
Width3.94 Inches
Part Number6CH 3.8V

8. SoloGood

#ad

SoloGood Emax Tinyhawk Whoop hv s LiPo Battery 450mAh 1S 3.8V 85C LIHV for cinewhoop tinyhawk JST-PH 2.0 Powerwhoop Connector Micro FPV Drone4 Packs

#ad
SoloGood #ad - Net weigh:12g, dimensions: 59mm*18mm*6mm L*W*H). Plug:ph2. 0please contact us in time hen you have any questions about the battery, we will take all responsibility for your satisfaction connector. Original emax 450mah 1s lihv lipo battery for emax tinyhawk Brushless Micro Indoor Racing Drone and the other Micro FPV Racing Drone. Discharge rate:80c, max Burst discharge Rate: 160C. Voltage: 3. 80v, connector: JST-PH 2. 0 .
BrandSoloGood #ad
ManufacturerEmax #ad
Height0 Inches
Length0 Inches
Width0 Inches
Part Number450mah

9. Crazepony

#ad

Crazepony 1S LiPo Battery Charging Board Blade Inductrix Ultra Micro JST-PH Parallel Connect Plate mCX mCPX

#ad
Crazepony #ad - Charge 6 batteries at the same time, keep your tiny whoop staying in the air. Output connector: 6x micro jst 1. 25; 6x jst-ph 2. 0 Suitable for battery of blade inductrix, Nano QX 3D, Glimpse, Nano CP X, mCP X, Nano QX etc. Input charge connector: male 4mm Banana Plug, it needs to connect to LiPo charger for charging battery. Board size: 62. 5x32x5mm, weight: 17g 06ounces.
BrandCrazepony #ad
ManufacturerCrazepony #ad
Height0.98 Inches
Length3.94 Inches
Weight0.04 Pounds
Width2.46 Inches
Part NumberI173540MK5WV281

10. iFlight

#ad

IFlight 5pcs Fullsend 300mah HV 40C 1S Lipo Battery with JST-PH 2.0 Connector for 60-80mm Tiny Whoop Drone

#ad
iFlight #ad - Reliable power for FPV tiny whoop quads. Iflight new 1s lipo battery- Fullsend 300mah 40C lipo battery. Long shape of this battery makes it works best on Alpha A65 Tiny Whoop drone. Very light weight and very compact size. Advanced battery technology, doubles your device's performance time.
BrandiFlight #ad
ManufactureriFlight #ad
Part Number0
ModelFULLSEND 300MAH