Top 6 CC3D Revolution – Camera & Photo Features

As an Amazon Associate I earn from qualifying purchases.

1. New Brand Name

#ad

New Brand Name BangBang OpenPilot CC3D Revolution Revo 10DOF STM32F4 Flight Controller Staight Pin

#adNew Brand Name #ad - Communication modules include USB2. 0, 4x usart, 2x dac, 2x can and SIDO. Cpu is the stm32f405rgt6 chip, with arm cortex-m4 core at 210MIPS, fpu, and saturation arithmetics DSP functions.

These include 14x multichanel timers, matrix memory controller with 16-stream DMA, 3x synchronous-sampling adc serving up to 24 channels, 3x SPI, 3x I2C, and other. The software and settings are loaded through USB connector and no-hassle update function in the GCS Ground Control Station. Package included: 1 x openpilot cc3d revolution Flight Controller with case 4 x connection cable 1 x 4pin cable 1 x antenna. Mpu: 6000, it even contains a real time hardware calendar if you want a wake up flight.

Brand	New Brand Name #ad
Manufacturer	New Brand Name #ad

2. USAQ

#ad

CC3D EVO Flight Controller 32-bit with Case Side Pin 90 Degree with Cables

#adUSAQ #ad - Software support for Windows, Mac, and Linux. Supports openPilot GCS Software. Tiny 36 x 36 mm 4 layer pCB for superior electrical noise reduction and flight performance. Direct high-speed usB support with no drivers required, a true plug and play device. Spektrum satellite receiver support integrated.

Brand	USAQ #ad
Manufacturer	USAQ #ad
Part Number	USAQ32RC

3. Hobbypower

#ad

Hobbypower CC3D Openpilot Self-stabilizing Flight Controller 32Bit for Mini 250 Quadcopter + 1 Hobbypower strap

#adHobbypower #ad - An all-in-one stabilization hardware which runs the OpenPilot firmware. Direct high speed usB support with no drivers required, a truly plug and play device. It can fly any airframe from fixed wing to an octocopter and is configured and monitored using the OpenPilot Ground Control Station GCS software. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Powerful stm32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.

Brand	Hobbypower #ad
Manufacturer	Hobbypower #ad
Height	0.5 Inches
Length	5 Inches
Weight	0.02 Pounds
Width	3 Inches
Part Number	49145B
Model	49145B

4. New Brand Name

#ad

BangBang OP GPS for Openpilot CC3D Revolution EVO Atom Mini CC3D Filght Controller

#adNew Brand Name #ad - Package included: 1 x OP GPS. Size: 26mm x 21mm. Wire length: 15cm. Weight: 8g. Op gps suitable for cc3d Series, the plug is Openpilot Original.

Brand	New Brand Name #ad
Manufacturer	New Brand Name #ad

5. Car - NY

#ad

NY OP GPS for Openpilot CC3D Revolution EVO Atom Mini Filght ControllerBest Racing Drones Like QAV250/ZMR250 SKU:11873, Car

#adCar - NY #ad - Op gps for openpilot cc3d revolution evo atom mini filght Controllerbest Racing drones like QAV250/ZMR250 SKU:11873.

Brand	Car - NY #ad
Manufacturer	5 #ad
Part Number	store111

6. Hobbypower

#ad

Hobbypower Unassembled DIY 250 Mini 250mm Quadcopter Frame Kit T2204 2300KV Motor +BLHeli 12A ESC + CC3D FC Flight Controller +5045 Props Propeller

#adHobbypower #ad - This kit is a very popular Mini Drone. Important note:if you are use 12a esc, do NOT USE 3S, pls replace the battery to 2S Lipo, easy to burnt. Preferred by knowledgeable Model Hobbists & R/C Enthusiasts. Unassembled, need remote control system and battery to complete. Easy to built, it has a strong rack, and a stable structure for smooth flight, beautiful appearance, it is the best choice for play and FPV.

Brand	Hobbypower #ad
Manufacturer	Hobbypower #ad