Wheeler Engineering Level Level Level Scope Mounting Leveling Tool with Magnetic Base and Adaptable Design for Scope Mounting, Gunsmithing and Maintenance


Sportsman Supply Inc. 113088 - Don't believe it! an accurate rifle requires level crosshairs, and the level-level-level gives you the means to level your scope perfectly in only minutes. Then level the scope, tighten the rings, and the job is done. The makers of some scope leveling devices tell you that leveling your scope to the top of the base produces a level scope.

Accuracy: ensure crosshairs are aligned for in line shot placement and reliable doping adjustments. Includes: a magnetized Action Level and a non-magnetized Scope Turret Level. Misaligned crosshairs Rob you of accurate bullet placement, especially at long range, where it counts. Level your scope as you mount it on your rifle.

Wheeler Engineering Level Level Level Scope Mounting Leveling Tool with Magnetic Base and Adaptable Design for Scope Mounting, Gunsmithing and Maintenance - The simplest, most accurate scope leveling system ever devised. The magnetic base in the rifle level bridges the bolt raceway, allowing you to position your rifle perfectly level. Ease of use: place the scope turret level on the top scope cap and the Action Level above the bolt; once the levels show a level scope, simply tighten the rings down.

Compact: small size allows for convenient storage and transport. The level-level-level works because the scope is leveled to your receiver, not to the top of a scope base. Crooked crosshairs cause your scope adjustments to be unreliable, and even make zeroing your rifle a frustrating and costly experience.

Works with practically any bolt-action rifle, and is adaptable to other designs.

More information about Sportsman Supply Inc. 113088

Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance


Wheeler 553556 - Wheeler's fat wrench brings perfect consistency to every screw on your rifle! This amazing handheld torque wrench lets you apply repeatable, guard screws and other screws, accurate torque settings to scope rings, which aids in accuracy and decreases the opportunity for problems in the field. Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%.

Ease of use: apply, repeatable, accurate torque settings to scope rings, windage screws and base screws, guard screws, which aids in accuracy and decreases the opportunity for problems in the field. Reliable: torque adjustment range from 10 in/lbs to 65 in/lbs. The fat wrench is a perfect complement to the Deluxe Gunsmithing Screwdriver Sets.

Wheeler Firearms Accurizing Torque Wrench with Inch/Pounds Measurement, Bits and Storage Case for Scope Mounting, Gunsmithing and Maintenance - Together, they can ensure accurate tightening of most every screw on any gun in your collection. Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Includes: 10 bits hex to square adapter, t20 torx, 7/64 hex, #32 flat blade, #10 flat blade, 5/32 hex, T15 torx and Leupold specialty flat blade, 3/32 hex, #11 flat blade, ¼" socket and a convenient plastic storage case.

More information about Wheeler 553556


Similar products



Wheeler 710909 Digital Firearms Accurizing Torque Wrench


Battenfeld Technologies 710909 - Ease of use: apply, repeatable, guard screws, windage screws and base screws, accurate torque settings to scope rings, which aids in accuracy and decreases the opportunity for problems in the field. Reliable: torque adjustment range from 10 in/lbs to 65 in/lbs. 2% accuracy. Includes: 10 bits hex to square adapter, 3/32 hex, t15 torx and leupold specialty flat blade, 5/32 hex, #32 flat blade, #10 flat blade, #11 flat blade, 7/64 hex, t20 torx, ¼" socket and a convenient plastic storage case.

Large lcd digital display for ease of viewing. Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Range. This amazing digital handheld torque wrench lets you apply repeatable, accurate torque settings to your scope rings, bows and other screws. The audible and visual indicators let the user know exactly when the desired torque setting has been achieved.

Wheeler 710909 Digital Firearms Accurizing Torque Wrench - Wrench bits are built to last and are made from s2 tool steel and hardened to 56-56 Rockwell "C" Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%. Will aid in accuracy of all your screws and decreases the opportunity for problems in the field. The F. A. T.

More information about Battenfeld Technologies 710909


Similar products



Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance


Battenfeld 181181 - Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks. 2% accuracy. The vise was designed to accommodate the widest possible array of firearms for cleaning, maintenance or gunsmithing, and works on several varieties of guns.

15 -100 in/lb. Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects. Range. The rear base features two adjustable offset clamps to fit a wide range of buttstocks.

Ease of use: apply, windage screws and base screws, guard screws, accurate torque settings to scope rings, repeatable, which aids in accuracy and decreases the opportunity for problems in the field. Reliable: torque adjustment range from 10 in/lbs to 65 in/lbs. Convenient: flat and round bottom compartments hold bottles, screws and parts.

Tipton Best Gun Vise for Cleaning, Gunsmithing and Gun Maintenance - Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Tipton’s best gun vise is the best tool you can own for working on your guns. Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%. Ease of use: l-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape.

More information about Battenfeld 181181


Similar products



Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single


Henkel 209728 - Overall depth - Front to Back: -069 inches. 209728 features: -Threadlocker. Useful for small motors, mowers, and power equipment. 2% accuracy. Audible indicator tone. Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%. Metal parts are removable with hand tools for easy disassembly. Overall width - Side to Side: -3.

81 inches. Range. Dimensions: overall Height - Top to Bottom: -6. 5 inches. Includes: 10 bits hex to square adapter, t15 torx and leupold specialty flat blade, #11 flat blade, #32 flat blade, t20 torx, 5/32 hex, 3/32 hex, #10 flat blade, 7/64 hex, ¼" socket and a convenient plastic storage case. Large lcd digital display for ease of viewing.

Loctite Heavy Duty Threadlocker, 0.2 oz, Blue 242, Single - Durable: non-marring, solvent-resistant polymer stands up to years of hard use. Product Type: -Threadlocker. Injection molded storage case. Convenient: flat and round bottom compartments hold bottles, screws and parts. Threadlocker blue 242 locks threaded metal fasteners against vibration loosening. Locks threaded fasteners against vibration loosening.

Ease of use: l-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape.

More information about Henkel 209728


Similar products



Vortex Optics Torque Wrench Mounting Kit


Vortex Optics RAC-VT-CTW - Threadlocker blue 242 locks threaded metal fasteners against vibration loosening. 2% accuracy. Injection molded storage case. Riflescope Accessories. Durable: non-marring, solvent-resistant polymer stands up to years of hard use. Useful for small motors, mowers, and power equipment. Riflescope accessories accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%.

15 -100 in/lb. Sets in 10 minutes; cures in 24 hours. Metal parts are removable with hand tools for easy disassembly. Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch 6mm to 20mm nuts and bolts. Convenient: flat and round bottom compartments hold bottles, screws and parts. Includes: 10 bits hex to square adapter, #32 flat blade, t20 torx, 3/32 hex, #11 flat blade, T15 torx and Leupold specialty flat blade, 5/32 hex, 7/64 hex, #10 flat blade, ¼" socket and a convenient plastic storage case.

Vortex Optics Torque Wrench Mounting Kit - Large lcd digital display for ease of viewing. Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks. Ease of use: apply, windage screws and base screws, guard screws, repeatable, accurate torque settings to scope rings, which aids in accuracy and decreases the opportunity for problems in the field.

Reliable: torque adjustment range from 10 in/lbs to 65 in/lbs. Audible indicator tone.

More information about Vortex Optics RAC-VT-CTW


Similar products



Vortex Optics Riflescope Bubble Level 30-mm


Vortex Optics BL30 - 2% accuracy. Audible indicator tone. Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects. Threadlocker blue 242 locks threaded metal fasteners against vibration loosening.

. Durable: non-marring, solvent-resistant polymer stands up to years of hard use. Available for 35mm, 34mm, 30mm, and 1-inch riflescope tubes. Use on 30-mm riflescope tube for the most precise long-range shooting. Use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.

Vortex Optics Riflescope Bubble Level 30-mm - Mounts quickly and easily to the riflescope tube. Range. Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%. Sets in 10 minutes; cures in 24 hours. Convenient: flat and round bottom compartments hold bottles, screws and parts. Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks.

Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch 6mm to 20mm nuts and bolts.

More information about Vortex Optics BL30


Similar products



Mercu Metal Bubble Spirit Level Anti Cant for 20mm Weave Picatinny Rifel Scope Leveling kit Mounts Sight with Wrench


Mercu - Metal parts are removable with hand tools for easy disassembly. Includes: 10 bits hex to square adapter, #10 flat blade, t20 torx, 7/64 hex, 5/32 hex, #11 flat blade, 3/32 hex, T15 torx and Leupold specialty flat blade, #32 flat blade, ¼" socket and a convenient plastic storage case. Large lcd digital display for ease of viewing.

15 -100 in/lb. Durable: non-marring, solvent-resistant polymer stands up to years of hard use. Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch 6mm to 20mm nuts and bolts. Threadlocker blue 242 locks threaded metal fasteners against vibration loosening. Sets in 10 minutes; cures in 24 hours. Ease of use: apply, windage screws and base screws, guard screws, repeatable, accurate torque settings to scope rings, which aids in accuracy and decreases the opportunity for problems in the field.

Mercu Metal Bubble Spirit Level Anti Cant for 20mm Weave Picatinny Rifel Scope Leveling kit Mounts Sight with Wrench - Reliable: torque adjustment range from 10 in/lbs to 65 in/lbs. Injection molded storage case. Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks. Convenient: flat and round bottom compartments hold bottles, screws and parts.

Riflescope Accessories.

More information about Mercu


Similar products



Vortex Optics Precision Matched Rings 30mm - Height 1.45 inches


Vortex Optics PMR-30-145 - Durable: non-marring, solvent-resistant polymer stands up to years of hard use. Metal parts are removable with hand tools for easy disassembly. Included components - vortex Optics Precision Matched Rings 30mm - Height 1. 45 inches. Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks.

Hex wrench included. Sets in 10 minutes; cures in 24 hours. Useful for small motors, mowers, and power equipment. Accuracy: +/- 2 in/lbs up to 40 in/lbs; 40 - 65 is +/- 5%. Threadlocker blue 242 locks threaded metal fasteners against vibration loosening. Convenient: flat and round bottom compartments hold bottles, screws and parts.

Vortex Optics Precision Matched Rings 30mm - Height 1.45 inches - Range. Injection molded storage case. Set of 2 precision matched Riflescope Rings, for 30MM Riflescope Tubes. Use on 30-mm riflescope tube for the most precise long-range shooting. Use the bubble level to ensure that the rifle is perfectly vertical. This will eliminate potential error caused by shooting a canted rifle.

Mounts quickly and easily to the riflescope tube.

More information about Vortex Optics PMR-30-145


Similar products



Tipton Ultra Gun Vise


Tipton - Dimensions: 32. 5" l x 11" w x 105" d. Threadlocker blue 242 locks threaded metal fasteners against vibration loosening. Sets in 10 minutes; cures in 24 hours. Material - Composite. Ease of use: all 4 feet are non-slip and independently adjustable, the tool and accessory trays are removable and the entire vise mounts directly to the benchtop hardware not included.

Ease of use: apply, windage screws and base screws, accurate torque settings to scope rings, repeatable, guard screws, which aids in accuracy and decreases the opportunity for problems in the field. Reliable: torque adjustment range from 10 in/lbs to 65 in/lbs. Innovative: customized patch storage and two adjustable offset clamping mechanism on the rear base for a tight grip on a wide variety of buttstocks.

Tipton Ultra Gun Vise - The tipton ultra gun Vise is a perfect fit for any serious firearm or archery owner. Durable: non-marring, solvent-resistant polymer stands up to years of hard use. Included components - vortex Optics Precision Matched Rings 30mm - Height 1. 45 inches. Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects.

Metal parts are removable with hand tools for easy disassembly. Will only work with Picatinny spec mounts-will not work with Weaver mounts.

More information about Tipton


Similar products



Wheeler Engineering Professional Reticle Leveling System with Heavy-Duty Construction, Universal Design and Storage Case for Gunsmithing and Maintenance


Sportsman Supply Inc. 119050 - A scope's reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. Durable: bits are made of s2 tool steel and hardened to 56-58 Rockwell "C". Cnc machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own.

The wheeler pearls is the most effective instrument available for precision scope alignment. Department - unisex-adult. Non-destructive: barrel Clamp Level features non-marring pads to ensure no damage is done at the contact points. Ease of use: l-shape center support holds break-open guns securely and separate quick-release cam blocks move independently to accommodate any stock shape.

Wheeler Engineering Professional Reticle Leveling System with Heavy-Duty Construction, Universal Design and Storage Case for Gunsmithing and Maintenance - Durable: precision machined aluminum with an anodized finish. Versatility: easily configurable to handle bolt-action rifles, break-open shotguns, extendable magazine rifles and handguns and every component adjusts to accommodate different firearms and projects. Prevents leaks and rusting of threads for 1/4-inch to 3/4-inch 6mm to 20mm nuts and bolts.

Durable: Features a steel tube frame structure. Technological advances in today's modern firearms, ammunition and optics have enhanced the potential for long range accuracy. Made in the usa.

More information about Sportsman Supply Inc. 119050


Similar products