Wheeler Master Gunsmithing Interchangeable Hammer Set

#ad
#ad
Battenfeld Technologies 110268 #ad - Comes with durable molded case that organizes, holds and protects components. 4 hammer faces with each hammer body: metal, brass, nylon and rubber. The steel head is for metal punches and surfaces, the plastic head is non marring, the brass head is for preventing marring of metal surfaces and for brass punches, and the rubber head is low recoil, and can prevent denting of wood.

The large hammer is ideal for driving out large or stubborn roll pins while the small hammer is designed for precise control of smaller roll pins. Includes 2 hammer bodies, one small and one large, and 8 hammer faces. The entire set comes with a durable molded case that organizes, holds and protects all the components in one place.

Wheeler Master Gunsmithing Interchangeable Hammer Set #ad - Hammer bodies are made of precision machined metal. Plastic head-non-marring, steel head-for metal punches and surfaces, brass head-for preventing marring of metal surfaces, rubber head-low recoil and prevents denting of wood. Simply unscrew each head and put on a different one. The wheeler engineering master gun smithing interchangeable hammer set includes 2 hammer bodies and 8 hammer faces, brass, 4 hammer faces with each hammer body: metal, nylon and rubber.

More information about Battenfeld Technologies 110268 #ad

Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance

#ad
#ad
Green Supply 672215 #ad - Includes: features a main spring removal recess, hammer and sear pin removal holes, barrel link removal V channel, front sight stalking channel, rear sight drift channel, ejector port dressing channel and a rail dressing round bottom channel.1-5/16" high, 4" in diameter. Ease of use: two-sided tool features all channels and holes needed to add or remove parts from most handguns.

Versatility: works perfectly for assembling and disassembling 1911s as well as 10/22s. Non-destructive: Constructed of non-marring urethane. Non-marring urethane for long use. It features a variety of notches, grooves, and holes on both sides and is ideally suited for M1911-style pistols. For firearm assembly and disassembly, the Universal Bench Block is your best friend.

Wheeler Universal Bench Block with Non-Marring Construction and Multiple Uses for Pistols, Gunsmithing and Maintenance #ad - Need to install a pin, detent, or spring? The Universal Bench Block is the answer. Dimensions: 1 1/4" H x 4" Diameter.

More information about Green Supply 672215 #ad


Similar products



Wheeler Roll Pin Punch Set

#ad
#ad
Battenfeld Technologies 204513 #ad - The 9 piece set includes: 5/16", 5/32", 3/16", 5/64", 1/8", 1/4", 7/32", 3/32", 1/16" punches in a nylon pouch. Ease of use: two-sided tool features all channels and holes needed to add or remove parts from most handguns. Versatility: works perfectly for assembling and disassembling 1911s as well as 10/22s.

Non-destructive: Constructed of non-marring urethane. Dimensions: 1 1/4" H x 4" Diameter. Fitted nylon storage pouch. Hemispherical recessed tips to cradle the roll pin. These punches are designed with a hemispherical tip to provide proper alignment of the roll pin to prevent damage to the firearm and the roll pin.

Wheeler Roll Pin Punch Set #ad - The wheeler engineering roll Pin Punches are machined from hardened steel to prevent bending or breaking while driving in any size roll pin. Ball profile tip to prevent slipping or damage to your firearm. Includes: features a main spring removal recess, barrel link removal V channel, front sight stalking channel, rear sight drift channel, hammer and sear pin removal holes, ejector port dressing channel and a rail dressing round bottom channel.

9 piece punch set includes: 5/16", 3/32", 5/64", 5/32", 1/4", 7/32", 3/16", 1/8", 1/16". Hardened steel construction.

More information about Battenfeld Technologies 204513 #ad


Similar products



Wheeler Engineering Roll Pin Starter Punch Set

#ad
#ad
Battenfeld Technologies 710910 #ad - Versatility: works perfectly for assembling and disassembling 1911s as well as 10/22s. Ease of use: two-sided tool features all channels and holes needed to add or remove parts from most handguns. Dimensions: 1 1/4" H x 4" Diameter. Ball profile tip to prevent slipping or damage to your firearm. Hemispherical recessed tips to cradle the roll pin.

Non-destructive: Constructed of non-marring urethane. The wheeler engineering roll pin Starter punch set are machined from hardened steel to prevent bending or breaking while driving any size roll pin. Fitted nylon storage pouch. The punches are designed with a beveled tip to provide proper alignment of the roll pin in the punch.

Wheeler Engineering Roll Pin Starter Punch Set #ad - The 9 piece set includes: 5/16", 3/16", 5/32", 1/8", 7/32", 1/4", 5/64", 3/32", 1/16" punches in a nylon pouch. Hardened steel construction. 9-piece set 1/16" through 5/16". Fitted Nylon storage pouch. Beveled tip for Starting the roll pin. Includes: features a main spring removal recess, barrel link removal V channel, hammer and sear pin removal holes, front sight stalking channel, rear sight drift channel, ejector port dressing channel and a rail dressing round bottom channel.

9 piece punch set includes: 5/16", 3/16", 3/32", 5/64", 5/32", 1/8", 1/4", 7/32", 1/16".

More information about Battenfeld Technologies 710910 #ad


Similar products



Wheeler Engineering 89-Piece Deluxe Gunsmithing Screwdriver Set with Durable Construction and Storage Case for Gunsmithing and Maintenance

#ad
#ad
Battenfeld 562194 #ad - Wheeler's gunsmithing 89 piece Screwdriver Set is the kit that belongs on every gunsmithing bench. Ball profile tip to prevent slipping or damage to your firearm. Hardened steel construction. Ease of use: hollow-ground bits have a concave shape that allows for insertion all the way into the screw slot for maximum contact.

The well thought-out bit selection will put an end to burred, buggered and busted up screw slots on any gun that comes your way. Beveled tip for Starting the roll pin. They're made from s2 tool steel and hardened to 56-58 Rockwell "C. Unlike other screwdriver suppliers, Wheeler's engineers measured the screws on over one hundred modern and antique firearms to make sure that we offered bits for every situation.

Wheeler Engineering 89-Piece Deluxe Gunsmithing Screwdriver Set with Durable Construction and Storage Case for Gunsmithing and Maintenance #ad - Versatility: features 54 hollow-ground flat bits, 8 Allen, 4 Phillips, 3 Torx, 15 specialty bits, 1 2 ¼ shaft extension and 1 hex-to-square drive adapter. Includes: 2 non-slip, overmolded plastic handles with a convenient hinged storage case. Whether you're working on a browning superposed, a smith & Wesson revolver, or a Colt Single Action, a Remington 700, you'll find that there's a bit to fit every screw on your gun.

Durable: constructed of strong, S2 tool steel. The bits make up the heart of any screwdriver set and Wheeler's are the finest available. Dimensions: 1 1/4" H x 4" Diameter.

More information about Battenfeld 562194 #ad


Similar products



Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block

#ad
#ad
Real Avid AVSBBLK Smart Bench Block #ad - Ball profile tip to prevent slipping or damage to your firearm. Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms. Made from engineering-grade resin, this block won’t mar or damage your favorite guns and the outside rubber liner keeps the block from sliding on any surface when driving pins.

Remove government 1911 bushings: an imbedded 1911 Government Bushing Wrench is included on the backside of the block this wrench makes removing bushings easy. Non-destructive: Constructed of non-marring urethane. Durable: constructed of strong, S2 tool steel. Hemispherical recessed tips to cradle the roll pin.

Real Avid Smart Bench Block- Non-Slip, Non-Marring Universal Gun Bench Block #ad - Dimensions: 1 1/4" H x 4" Diameter. So intelligently designed, you’ll feel smarter just using it. Fitted nylon storage pouch. Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns. The universal smart bench block is a tool that any gun owner looking to do minor to major work on their firearm will be happy to have.

Perfect for: gunsmiths of all skill ranges; Gun owners who are looking to do more detailed work; Gun enthusiasts who are looking to work on all types of guns. Versatility: features 54 hollow-ground flat bits, 8 Allen, 15 specialty bits, 3 Torx, 4 Phillips, 1 2 ¼ shaft extension and 1 hex-to-square drive adapter.

Includes: 2 non-slip, overmolded plastic handles with a convenient hinged storage case.

More information about Real Avid AVSBBLK Smart Bench Block #ad


Similar products



Lyman Products X-Block Magnetic Gunsmith Bench Block

#ad
#ad
Lyman Products 04078 #ad - Hardened steel construction. Includes: features a main spring removal recess, front sight stalking channel, hammer and sear pin removal holes, rear sight drift channel, barrel link removal V channel, ejector port dressing channel and a rail dressing round bottom channel.9 piece punch set includes: 5/16", 1/8", 1/4", 3/32", 5/32", 3/16", 5/64", 7/32", 1/16".

Hardened steel construction. Made of tough, non-marring polymer to protect metal finishes. It has all the features to get the job done smoothly and professionally. 9-piece set 1/16" through 5/16". Fitted nylon storage pouch. Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms.

Lyman Products X-Block Magnetic Gunsmith Bench Block #ad - Durable: constructed of strong, S2 tool steel. Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns. The x-block has both a "v" slot and a rounded Slot running across the face of the block to support a variety of barrels and slides. V" slot and rounded slot run across the block face to fit most every need such as pistol barrels, slides and frames.

Hemispherical recessed tips to cradle the roll pin. Dimensions: 1 1/4" H x 4" Diameter.

More information about Lyman Products 04078 #ad


Similar products



Wheeler 30 Piece SAE/Metric Hex and Torx P-Handle Set for Pistol Rifle Handgun Gunsmithing Rebuild and Maintenance

#ad
#ad
Battenfeld Technologies 1081957 #ad - Fitted Nylon storage pouch. Beveled tip for Starting the roll pin. Soft, non-slip sidewalls for improved grip. 30 piece p-handle driver set sae/metric Hex and Torx. Magnet molded into the x block base to catch pins or small parts. Scratch resistant material: the engineering-grade resin won't mar or damage your favorite guns.

Dimensions: 1 1/4" H x 4" Diameter. Versatility: features 54 hollow-ground flat bits, 15 specialty bits, 8 Allen, 3 Torx, 4 Phillips, 1 2 ¼ shaft extension and 1 hex-to-square drive adapter. Includes: 2 non-slip, overmolded plastic handles with a convenient hinged storage case. Complete your workbench with the Wheeler 30-piece p-handle driver set.

Wheeler 30 Piece SAE/Metric Hex and Torx P-Handle Set for Pistol Rifle Handgun Gunsmithing Rebuild and Maintenance #ad - Ease of use: two-sided tool features all channels and holes needed to add or remove parts from most handguns. This screwdriver set is the perfect addition to any workshop. Durable: constructed of strong, S2 tool steel. The sleek molded stand design paired with its ability to be mounted on the wall allow for quick, convenient access to the sae hex, metric hex and torx drivers.

Capture pins underneath the block: after pins are punched the outer ring prevents pins from rolling away. 9-piece set 1/16" through 5/16". Includes sae hex bits-standard 3/32" and standard 7/64" and ball 1/8", 9/64", 7/32", 3/16", 5/32", 1/4", 5/16", 3/8".

More information about Battenfeld Technologies 1081957 #ad


Similar products



Wheeler Engineering Professional Gunsmithing File Set

#ad
#ad
Battenfeld Technologies 710908 #ad - Versatility: works perfectly for assembling and disassembling 1911s as well as 10/22s. Fitted Nylon storage pouch. Includes 18 files. Large 5 inch diameter work surface. Ball profile tip to prevent slipping or damage to your firearm. The wheeler engineering professional gunsmith file set is perfect for many different Gunsmithing jobs.

Includes one each of the following: 8" half round file, small flat coarse grit diamond file, small triangle medium grit diamond file, file cleaning brush, small Triangle coarse grit Diamond file, small round coarse grit Diamond file, small flat medium grit Diamond file, 4-n-1 rasp, 6" round file, 6" Triangle file, stick of file chalk, extra fine Diamond plate, 6" square file, small flat fine grit Diamond file, small round fine grit Diamond file, small round medium grit Diamond file, 8" flat file, small Triangle fine grit Diamond file Dimensions: 1 1/4" H x 4" Diameter.

Wheeler Engineering Professional Gunsmithing File Set #ad - Hardened steel construction. 9-piece set 1/16" through 5/16". Hemispherical recessed tips to cradle the roll pin. A steady and stable work surface: the non-slip outer ring steadies the block during use and the inner groove keeps barrels stable during detailed work. The set comes with a wide grade of files from a rough rasp all the way down to a super fine emery board.

Ease of use: hollow-ground bits have a concave shape that allows for insertion all the way into the screw slot for maximum contact. Whether your reshaping a wood stock or smoothing out an action, this set is perfect for you.

More information about Battenfeld Technologies 710908 #ad


Similar products



Wheeler 710906 Engineering Bolt Catch Install Tool Kit

#ad
#ad
Battenfeld Technologies 710906 #ad - Flat on one side for proper alignment. Soft, non-slip sidewalls for improved grip. Ease of use: hollow-ground bits have a concave shape that allows for insertion all the way into the screw slot for maximum contact. Easily remove pins from a variety of guns: universal pin hole sizes accommodate a wide variety of firearms.

Comes with a Nylon roll-up storage case. Versatility: works perfectly for assembling and disassembling 1911s as well as 10/22s. Wheeler engineering bolt catch Install Tool Kit: start bolt catch roll pin easily with starter punch and finish installation flush with the finishing punch. Includes: features a main spring removal recess, hammer and sear pin removal holes, front sight stalking channel, barrel link removal V channel, rear sight drift channel, ejector port dressing channel and a rail dressing round bottom channel.

Wheeler 710906 Engineering Bolt Catch Install Tool Kit #ad - 9 piece punch set includes: 5/16", 5/32", 7/32", 3/16", 1/4", 5/64", 1/8", 3/32", 1/16". Hardened steel construction. 30 piece p-handle driver set sae/metric Hex and Torx. Ball profile tip to prevent slipping or damage to your firearm. Made of tough, non-marring polymer to protect metal finishes. Includes sae hex bits-standard 3/32" and standard 7/64" and ball 1/8", 5/16", 9/64", 7/32", 3/16", 5/32", 1/4", 3/8".

Includes metric hex bits: standard 1.

More information about Battenfeld Technologies 710906 #ad


Similar products



Wheeler Engineering Armorer's Handgun Sight Tool with Heavy-Duty Construction and Reversible Assembly for Handguns, Gunsmithing and Maintenance

#ad
#ad
Battenfeld Technologies 710905 #ad - A steady and stable work surface: the non-slip outer ring steadies the block during use and the inner groove keeps barrels stable during detailed work. Dimensions: 1 1/4" H x 4" Diameter. Versatility: works on all semi-auto pistols and the sight prong is reversible to accommodate Glock slides. Includes 18 files.

Hardened steel construction. 9-piece set 1/16" through 5/16". Magnet molded into the x block base to catch pins or small parts. Versatility: features 54 hollow-ground flat bits, 4 Phillips, 3 Torx, 8 Allen, 15 specialty bits, 1 2 ¼ shaft extension and 1 hex-to-square drive adapter. Includes: 2 non-slip, overmolded plastic handles with a convenient hinged storage case.

Wheeler Engineering Armorer's Handgun Sight Tool with Heavy-Duty Construction and Reversible Assembly for Handguns, Gunsmithing and Maintenance #ad - Fitted nylon storage pouch. Comes with a Nylon roll-up storage case. 1 with indexing tips to finish roll pins. Start bolt catch roll pin easily with starter punch. Beveled tip for Starting the roll pin. The sight tool works on all semi-automatic pistols. Includes: features a main spring removal recess, barrel link removal V channel, front sight stalking channel, hammer and sear pin removal holes, rear sight drift channel, ejector port dressing channel and a rail dressing round bottom channel.

9 piece punch set includes: 5/16", 5/32", 1/4", 3/16", 7/32", 1/8", 5/64", 3/32", 1/16".

More information about Battenfeld Technologies 710905 #ad


Similar products